Shawl Geometry: Wedge Circle with a Slit
This is the fourteenth post in a series about different shawl shapes and how to knit them. All the posts in the series can be found right here.
Wedge Circle with a Slit from the center out
Just like you can work a Square with a Slit, you can also work the Wedge Circle with a Slit. You work all the same shaping and patterning as the full Wedge Circle, but worked at in rows, rather than in the round.
Knitting Instructions
CO 12sts.
{4 border sts + 8 sections}
R1: k2, (pm, yo, k1) 8 times, k2.
R2: purl across.
R3: k2, (sm, yo, k to marker) 8 times, k2.
R4: purl across.
Rep R3&4 to desired dimensions.
Bind off loosely.
Wedge Circle with a Slit from the hem in
Calculating your cast on
Determine your final gauge and the desired radius of your shawl.
The radius is half the width of your final shawl, or the length from the center of your shawl to the edge.
[Row gauge] x [desired radius] = [# of rows]
[# of rows] / 2 = [# of dec rows]
[# of dec rows] x [8sts decreased per dec row] = [# of sts decreased]
Make sure this number is divisible by 8.
[# of sts decreased] = [# of sts to CO]
Calculating your stitch marker placement
[# of sts to CO] / [8 shawl sections] = [# of sts in one section aka Y]
Knitting Instructions
CO [# of sts to CO].
R1: (pm, ssk, kY minus two) 8 times.
R2: purl across.
R3: (sm, ssk, k to marker) 8 times.
R4: purl across.
Rep R3&4 to 8sts.
Bind off loosely.
The previous post: Squares with a Diagonal Slit
The next post: 3/4 Square
It’s Here!
and I’m dancing around my apartment!
It’s the ebook for the Shawl Geometry blog series.
You can learn more about the ebook, and buy it over here.
But why should I buy the ebook when I could just follow the blog?
A couple reasons actually.
- immediacy: you get the FULL Shawl Geometry series. Immediately. The blog series is scheduled to finish the last week of July. When you buy the ebook you get it all right now.
- convenience: you can access it offline. Print pages to stick in your knitting bag, or scribble notes all over.
- ease: you don’t have to dig through tons of blog posts to find the shape you’re looking for. In the ebook they’re all in one place, right at your finger tips.
and for $23 it’s WAY easier than reinventing the wheel.
Or click here to get more information about the Shawl Geometry ebook.
Shawl Geometry: Octagon Circle
This is the fifth post in a series about different shawl shapes and how to knit them. All the posts in the series can be found right here.
The Octagon Circle (or a Circle with Concentric Circles of Increases) is comprised of eight acute triangular wedges, which are formed using eight pairs (16 total) of increases (or decreases) worked every 4th or 6th round.
This particular way of shaping a circular shawl goes by plenty of different names. Sometimes it’s called the Traditional Circle, sometimes it’s the Wedge Circle, sometimes it’s just called the Circle. I call this the Octagon Circle because this name seemed the best fit for how I went about explaining this shawl’s shaping.
Working your Shaping every 4th vs 6th round
The shaping in this shawl can either be worked on the 4th round, or the 6th round of your knitting. Which round you work your increases (or decreases) on depends on your gauge, yarn, needles, and stitch pattern.
So, how do you figure out which round to work shaping on?
Option 1: Swatch.
Option 2: Pick one, and block aggressively.
If you go with Option #2, I’d suggest working your shaping every 4th round, because more frequent shaping means you have more fabric to work with.
It’s far less nerve wracking to block a ruffle at (since you know that at the very least you have more than enough fabric to go around), than it is to try and make not-enough-knitting stretch flat. It also means that you don’t risk distorting your stitch pattern (or snapping a thread) with over aggressive blocking trying to get your shawl to lie flat.
Octagon Circle from the center out
This way of creating a circle is similar to working a square shawl from the center out. However instead of working 4 pairs of increases every other row, we work 8 pairs of increases every 4th or 6th row.
Knitting Instructions
For a shawl that increases 16sts (8 pairs of increases) every 4th round:
CO 16sts. Join in the round, being careful not to twist.
{8 sections + 8 spines}
R1: (pm, yo, k1, yo, pm, k1) 8 times.
R2, 3, 4: knit around.
R5: (sm, yo, k to marker, yo, sm, k1) 8 times.
R6, 7, 8: knit around.
Rep R5-8 to desired dimensions.
Bind off loosely.
For a shawl that increases 16sts (8 pairs of increases) every 6th round:
CO 16sts. Join in the round, being careful not to twist.
{8 sections + 8 spines}
R1: (pm, yo, k1, yo, pm, k1) 8 times.
R2, 3, 4, 5, 6: knit around.
R7: (sm, yo, k to marker, yo, sm, k1) 8 times.
R8, 9, 10, 11, 12: knit around.
Rep R7-12 to desired dimensions.
Bind off loosely.
Whether you increase every 4th round or every 6th round depends on a lot of factors, including, but not limited to, your gauge, your stitch pattern, your yarn, your personal preference, etc.
Octagon Circle from the hem in
I’ve included here the calculations and instructions for working an Octagon Circle from the hem in with your shaping worked every 4th round.
Calculating your cast on
Determine your final gauge and the desired radius of your shawl.
The radius is half the width of your final shawl, or the length from the center of your shawl to the edge.
[Rnd gauge] x [desired radius] = [# of rnds]
[# of rnds] / [4 rnds in a dec rep] = [# of dec reps]
[# of dec reps] x [16sts decreased per dec reps] = [# of sts decreased]
Make sure this number a whole number that is divisible by 16.
[# of sts decreased] = [# of sts to CO]
Calculating your stitch marker placement
[# of sts decreased] / [8 shawl sections] = [# of sts in one section aka Y]
Knitting Instructions
CO [# of sts to CO].
R1: (pm, ssk, kY minus four, k2tog) 8 times.
R2, 3, 4: knit around.
R5: (sm, ssk, k to 2sts before marker, k2tog) 8 times.
R6, 7, 8: knit around.
Rep R5-8 to 16sts.
Bind off loosely.
The previous post: Pi Circle
The next post: Right Triangle
