Shawl Geometry: Octagon Circle
This is the fifth post in a series about different shawl shapes and how to knit them. All the posts in the series can be found right here.
The Octagon Circle (or a Circle with Concentric Circles of Increases) is comprised of eight acute triangular wedges, which are formed using eight pairs (16 total) of increases (or decreases) worked every 4th or 6th round.
This particular way of shaping a circular shawl goes by plenty of different names. Sometimes it’s called the Traditional Circle, sometimes it’s the Wedge Circle, sometimes it’s just called the Circle. I call this the Octagon Circle because this name seemed the best fit for how I went about explaining this shawl’s shaping.
Working your Shaping every 4th vs 6th round
The shaping in this shawl can either be worked on the 4th round, or the 6th round of your knitting. Which round you work your increases (or decreases) on depends on your gauge, yarn, needles, and stitch pattern.
So, how do you figure out which round to work shaping on?
Option 1: Swatch.
Option 2: Pick one, and block aggressively.
If you go with Option #2, I’d suggest working your shaping every 4th round, because more frequent shaping means you have more fabric to work with.
It’s far less nerve wracking to block a ruffle at (since you know that at the very least you have more than enough fabric to go around), than it is to try and make not-enough-knitting stretch flat. It also means that you don’t risk distorting your stitch pattern (or snapping a thread) with over aggressive blocking trying to get your shawl to lie flat.
Octagon Circle from the center out
This way of creating a circle is similar to working a square shawl from the center out. However instead of working 4 pairs of increases every other row, we work 8 pairs of increases every 4th or 6th row.
Knitting Instructions
For a shawl that increases 16sts (8 pairs of increases) every 4th round:
CO 16sts. Join in the round, being careful not to twist.
{8 sections + 8 spines}
R1: (pm, yo, k1, yo, pm, k1) 8 times.
R2, 3, 4: knit around.
R5: (sm, yo, k to marker, yo, sm, k1) 8 times.
R6, 7, 8: knit around.
Rep R5-8 to desired dimensions.
Bind off loosely.
For a shawl that increases 16sts (8 pairs of increases) every 6th round:
CO 16sts. Join in the round, being careful not to twist.
{8 sections + 8 spines}
R1: (pm, yo, k1, yo, pm, k1) 8 times.
R2, 3, 4, 5, 6: knit around.
R7: (sm, yo, k to marker, yo, sm, k1) 8 times.
R8, 9, 10, 11, 12: knit around.
Rep R7-12 to desired dimensions.
Bind off loosely.
Whether you increase every 4th round or every 6th round depends on a lot of factors, including, but not limited to, your gauge, your stitch pattern, your yarn, your personal preference, etc.
Octagon Circle from the hem in
I’ve included here the calculations and instructions for working an Octagon Circle from the hem in with your shaping worked every 4th round.
Calculating your cast on
Determine your final gauge and the desired radius of your shawl.
The radius is half the width of your final shawl, or the length from the center of your shawl to the edge.
[Rnd gauge] x [desired radius] = [# of rnds]
[# of rnds] / [4 rnds in a dec rep] = [# of dec reps]
[# of dec reps] x [16sts decreased per dec reps] = [# of sts decreased]
Make sure this number a whole number that is divisible by 16.
[# of sts decreased] = [# of sts to CO]
Calculating your stitch marker placement
[# of sts decreased] / [8 shawl sections] = [# of sts in one section aka Y]
Knitting Instructions
CO [# of sts to CO].
R1: (pm, ssk, kY minus four, k2tog) 8 times.
R2, 3, 4: knit around.
R5: (sm, ssk, k to 2sts before marker, k2tog) 8 times.
R6, 7, 8: knit around.
Rep R5-8 to 16sts.
Bind off loosely.
The previous post: Pi Circle
The next post: Right Triangle
Shawl Geometry: Right Triangle
This is the fourth post in a series about different shawl shapes and how to knit them. All the posts in the series can be found right here.
Right Triangle from the top down
If you take a square and cut it in half diagonally, you’ll be left with two right triangles. So, working half of the shaping for a Square Knit in the Round, will give you a Right Triangle shawl.
The Right Triangle is shaped using a pair of increases (or decreases) down the center spine, and a single increase (or decreases) along either edge, all worked every other row.
Knitting Instructions
CO 7sts.
{4 border sts + 2 sections + 1 spine}
R1: k2, yo, k1, yo, pm, k1, pm, yo, k1, yo, k2.
R2: purl across.
R3: k2, yo, k to marker, yo, sm, k1, sm, yo, k to last 2sts, yo, k2.
R4: purl across.
Rep R3&4 to desired dimensions.
Bind off loosely.
Right Triangle from the bottom up
Just like the Square Knit in the Round, can be worked from the center out and the hem in, this Right Triangle can be worked from the top down or the bottom up. This makes sense since a triangle is half a square.
Calculating your cast on
Determine your final gauge, and desired depth down the center spine.
[Desired depth] / 2 = [Z]
[Z] x [1.4142] = [magic number]
[Magic number] x [row gauge] = [# of rows]
[# of rows] / 2 = [# of dec rows]
[# of dec rows] x [4sts decreased per dec row] = [# of sts decreased]
Make sure this number is divisible by 4.
[# of sts decreased] = [# of sts to CO]
Calculating your stitch marker placement
[# of sts to CO] / [2 shawl sections] = [# of sts in one section aka Y]
Knitting Instructions
CO [# of sts to CO].
R1: ssk, kY minus four, k2tog, pm, ssk, kY minus four, k2tog.
R2: purl across.
R3: ssk, k to 2sts before marker, k2tog, sm, ssk, k to last 2sts, k2tog. R4: purl across.
Rep R3&4 to 4sts.
Bind off loosely.
Both of these methods create shawls that are half squares and right triangles. Some people find these a little bit hard to wear in that they slide off the shoulders and are therefore a little bit fiddly. So over the next two weeks we’ll talk about two variations that I think are a little easier to wear, a Shallower Triangle and a Right Triangle with “Wings.”
These are simply the basics, backwards and forwards. These basics can then be manipulated and expanded upon and played with to create a myriad of other shawl shapes. However, these shapes are incredibly powerful on their own, add patterns & textures, lace, cables, knits/purls, color work, anything you can think of.
The previous post: Octagon Circle
The next post: Shallower Triangle
Creative energy is up
But what would happen if you* knew that creative energy was up all the flipping time?
*in this post you really means me, and (maybe) you too but only if you want it to
What would you make? What would you create?
What would you put out into the world that didn’t exist before you?
And that wouldn’t exist without you?
What if you thought creative energy was always up?
And that the variable was you* not it?
*me
What if the variable in the equation
you* + inspiration + time = art
*remember, you meaning me, and you if you want it
wasn’t inspiration, or time, or creativity, or ideas, or your muse, or any one of a million other things? But rather the thing that changed and moved and shifted was you?
Then wouldn’t you* become the thing keeping your art from existing?
*me
And with that little bit of fortune cookie inspired musing I’m going to go knit so that I have a better chance of having a knitting based WIP Wednesday for you next week.
Related posts
